D0LLË
INFO
This bowtie accessory is a cute add on to any outfit. while being a little touch and a simple accessory there are high quality materials and a detail oriented contracted pattern at the foundation of this piece. The bow itself is attached by a 90 degree ring made from denim webbing, which can be slid out of the collar-like adjustable strap to be cleaned or swapped for another material. The strap is adjustable with a 316L SS slider and a rhodium hook and loop clasp to fasten it around the neck.
SIZING
One size: Adjustable
This bowtie accessory is made for petite to large sized necks with adding an adjustable slider
Model size reference:
Meiji : 5’5” and 120lbs
MATERIALS
Sourced:
1x 5lbs of 10 ounce denim
1x 1” Rhodium Hook and loop clasp
1x 1” 316L SS sliders
1” elastic tape
Bonded nylon b49 thread
CREATION TIME
2.5 Total hours
Sourcing new materials:
.5x hours
Preparation :
.5x hours
Creation:
1x hours
Cleanup:
.5x hours
CLEANING & CARE
Hand wash with warm water and laundry soap; avoid rough abrasions against the fabric. Gently wring out the wet garment. Hang it up to air dry. Since the material is thick, it may take some time for the garment to dry completely. Store the damp garment in a warm, dry area until it is fully dry. Once dry, you can press and steam it if necessary. You can also use starch to stiffen the material if desired
STORAGE
When the garment is dry and ready to be set aside for storage, you have two options: folding or hanging. Hanging is the preferred choice as it allows the fibers to naturally align with gravity and stay in sync with each other. However, if you choose to fold, keep in mind that denim holds creases well but may require steaming or pressing to remove any wrinkles.
For archival storage, fold the garment into a desired, even-sized square that fits inside an airtight vacuum-sealed bag. Once sealed, store it in light-tight containers, making sure there are no objects that can puncture the bag.
When you're ready to remove the garment from archival storage, release the air slowly, allowing the fabric to expand naturally without any irritation. Once the fabric has stopped expanding with air, open the bag and remove the clothing to hang. Hanging will naturally allow the fibers to align with the pattern and drape correctly. From there, you can proceed with the cleaning and drying process to prepare the garment for use.
Made to Order
This item, part of the AW23 Collection, was a unique 1/1 piece and has already been sold. Since it was primarily crafted from recycled materials, we do not have any inventory available for this specific item.
Nevertheless, we do offer the option for custom commissions. You can specify your preferred size, and we will source the materials, whether brand new or recycled textiles, to create a unique piece just for you.
Furthermore, we are open to accommodating custom and extensive alterations for a more personalized fit or aesthetic. Please note that intricate alterations that require additional construction time may be charged separately as a 'commission' service at an hourly rate. If you have any inquiries or wish to discuss alterations to your pattern, please feel free to get in touch with us.
INFO
This bowtie accessory is a cute add on to any outfit. while being a little touch and a simple accessory there are high quality materials and a detail oriented contracted pattern at the foundation of this piece. The bow itself is attached by a 90 degree ring made from denim webbing, which can be slid out of the collar-like adjustable strap to be cleaned or swapped for another material. The strap is adjustable with a 316L SS slider and a rhodium hook and loop clasp to fasten it around the neck.
SIZING
One size: Adjustable
This bowtie accessory is made for petite to large sized necks with adding an adjustable slider
Model size reference:
Meiji : 5’5” and 120lbs
MATERIALS
Sourced:
1x 5lbs of 10 ounce denim
1x 1” Rhodium Hook and loop clasp
1x 1” 316L SS sliders
1” elastic tape
Bonded nylon b49 thread
CREATION TIME
2.5 Total hours
Sourcing new materials:
.5x hours
Preparation :
.5x hours
Creation:
1x hours
Cleanup:
.5x hours
CLEANING & CARE
Hand wash with warm water and laundry soap; avoid rough abrasions against the fabric. Gently wring out the wet garment. Hang it up to air dry. Since the material is thick, it may take some time for the garment to dry completely. Store the damp garment in a warm, dry area until it is fully dry. Once dry, you can press and steam it if necessary. You can also use starch to stiffen the material if desired
STORAGE
When the garment is dry and ready to be set aside for storage, you have two options: folding or hanging. Hanging is the preferred choice as it allows the fibers to naturally align with gravity and stay in sync with each other. However, if you choose to fold, keep in mind that denim holds creases well but may require steaming or pressing to remove any wrinkles.
For archival storage, fold the garment into a desired, even-sized square that fits inside an airtight vacuum-sealed bag. Once sealed, store it in light-tight containers, making sure there are no objects that can puncture the bag.
When you're ready to remove the garment from archival storage, release the air slowly, allowing the fabric to expand naturally without any irritation. Once the fabric has stopped expanding with air, open the bag and remove the clothing to hang. Hanging will naturally allow the fibers to align with the pattern and drape correctly. From there, you can proceed with the cleaning and drying process to prepare the garment for use.
Made to Order
This item, part of the AW23 Collection, was a unique 1/1 piece and has already been sold. Since it was primarily crafted from recycled materials, we do not have any inventory available for this specific item.
Nevertheless, we do offer the option for custom commissions. You can specify your preferred size, and we will source the materials, whether brand new or recycled textiles, to create a unique piece just for you.
Furthermore, we are open to accommodating custom and extensive alterations for a more personalized fit or aesthetic. Please note that intricate alterations that require additional construction time may be charged separately as a 'commission' service at an hourly rate. If you have any inquiries or wish to discuss alterations to your pattern, please feel free to get in touch with us.
INFO
This bowtie accessory is a cute add on to any outfit. while being a little touch and a simple accessory there are high quality materials and a detail oriented contracted pattern at the foundation of this piece. The bow itself is attached by a 90 degree ring made from denim webbing, which can be slid out of the collar-like adjustable strap to be cleaned or swapped for another material. The strap is adjustable with a 316L SS slider and a rhodium hook and loop clasp to fasten it around the neck.
SIZING
One size: Adjustable
This bowtie accessory is made for petite to large sized necks with adding an adjustable slider
Model size reference:
Meiji : 5’5” and 120lbs
MATERIALS
Sourced:
1x 5lbs of 10 ounce denim
1x 1” Rhodium Hook and loop clasp
1x 1” 316L SS sliders
1” elastic tape
Bonded nylon b49 thread
CREATION TIME
2.5 Total hours
Sourcing new materials:
.5x hours
Preparation :
.5x hours
Creation:
1x hours
Cleanup:
.5x hours
CLEANING & CARE
Hand wash with warm water and laundry soap; avoid rough abrasions against the fabric. Gently wring out the wet garment. Hang it up to air dry. Since the material is thick, it may take some time for the garment to dry completely. Store the damp garment in a warm, dry area until it is fully dry. Once dry, you can press and steam it if necessary. You can also use starch to stiffen the material if desired
STORAGE
When the garment is dry and ready to be set aside for storage, you have two options: folding or hanging. Hanging is the preferred choice as it allows the fibers to naturally align with gravity and stay in sync with each other. However, if you choose to fold, keep in mind that denim holds creases well but may require steaming or pressing to remove any wrinkles.
For archival storage, fold the garment into a desired, even-sized square that fits inside an airtight vacuum-sealed bag. Once sealed, store it in light-tight containers, making sure there are no objects that can puncture the bag.
When you're ready to remove the garment from archival storage, release the air slowly, allowing the fabric to expand naturally without any irritation. Once the fabric has stopped expanding with air, open the bag and remove the clothing to hang. Hanging will naturally allow the fibers to align with the pattern and drape correctly. From there, you can proceed with the cleaning and drying process to prepare the garment for use.
Made to Order
This item, part of the AW23 Collection, was a unique 1/1 piece and has already been sold. Since it was primarily crafted from recycled materials, we do not have any inventory available for this specific item.
Nevertheless, we do offer the option for custom commissions. You can specify your preferred size, and we will source the materials, whether brand new or recycled textiles, to create a unique piece just for you.
Furthermore, we are open to accommodating custom and extensive alterations for a more personalized fit or aesthetic. Please note that intricate alterations that require additional construction time may be charged separately as a 'commission' service at an hourly rate. If you have any inquiries or wish to discuss alterations to your pattern, please feel free to get in touch with us.